@szopen, post #66
@respector, post #48
@abcdef, post #68
Amiga compatibiliy with Amiga OCS/ECS and AGA modes
@szopen, post #49
@abcdef, post #64
Co z features z apollo accelerators i opisu V4SA nie zgadza się ze stanem faktycznym?
@X-Type^HVR, post #30
@respector, post #81
CPU Apollo 68080 Core
Equivalent to 1000MHz 68030 / 500MHz 68040 / 250MHz 68060
Memory 512 MB DDR3 RAM
Chipset Super-AGA Core with 12 MB of fast ChipRAM
Video Amiga compatibiliy with Amiga OCS/ECS and AGA modes
also supporting 8bit/15bit/16bit/24bit/32bit Video modes and Video acceleration.
Audio 8 Amiga DMA driven Audio channels, supporting 8-bit and 16-bit audio samples up to 56 kHz sampling rate, 24-bit mixing n.
Networking 100BaseTX buildin Ethernet with 64bit AMIGA DMA channel.
Fast IDE Port 44-pin Fast IDE Interface with Up to 19 MB/s data transfer speed.
Internal Expansion ports RTC module clock port,
and 3 Expansion ports
External ports MicroSD Card
2 x USB-A for Mouse and Keyboard
2 x DB-9 (Amiga joystick)
Audio
All Amiga audio is output from this interface, as digital audio.
If your monitor or TV has built-in speakers, you can play the audio from there.
Some monitors and TVs have audio output or headphone jacks, so you can pass the audio through to a different device.
Alternatively, from the Vampire's Digital Video/Audio signal, you can extract the audio to various output formats (S/PDIF, analog RCA, headphone, etc.) using an “audio extractor/splitter”. (Some purchase options: 1, 2, 3, 4)
@juen, post #84
@abcdef, post #85
@abcdef, post #83
PCM5102A DAC Decoder Board
Can be used to output analog audio from the Vampire through RCA audio jacks.
Must be connected to the Expansion Port using female-to-female jumper wires like these ones.
I2C Can be used to connect simple, low-speed devices like battery-backed real-time clocks (RTC), small LCD/OLED displays, temperature sensors, etc.
With an appropriate splitter, multiple devices can be connected to a single port.
The following I2C devices were tested successfully with this port:
@snajper, post #3
@SzaryWilk, post #89